Author: Gyanesh Chakraborty

Massing Top or Bottom Stop Readily apparent and will result in zipper failure if facilities for attaching a top or

Unit Objectives At the end of this unit, you will be able to 1.Recognize the different types of sewing machine

Parts of a Basic Sewing Machine and Their Functions It is important for the beginner to know and recognize the

1.Put the piness foot in the ascendant pun Place a reel of the on the spool holder Hoving from the

Common Sewing Machine Problems and their Solutions Different Hand Sewing Methods Every tailor should know a few of the basic

Unit Objectives At the end of this unit, you will be able to 1 Recognize the different parts of a

Step 1: Take the fused j-fly piece and put overlock stitch on the face side of the fabric starting from

Step 1: Take both the left and right back pieces. Match them face- to- face. Step 2: Put 1 cm

Step 1: Fold the bottom of right trouser leg 1 cm inside Again fold the fabric to the required width

Step 1: Take the fused pocket piece. Step 2: Locate the notch marks. Step 3: Now fold the top part

Step 1: Take the two sleeve pieces and identify the notch marks on the armhole side in each one of

Step 1: Match the armhole and align the loose ends. Step 2 : Take the right hand sleeve Stitch 1

Collar and Neckband Preparation Step 1: Take the fused neckband piece. Turn the bottomend of the piece  with your hand.

Cuff Attachment to Sleeve Step 1: First, check that there are 4 notches for sleeve plesatsand one notch at the

Measurements needed .Chest .Full length of the blouse .Shoulder .Sleeve length .Sleeve round . Front length-Measured from shoulder along the