Free Advance Pattern Maker Course(1year Diploma)
Advance Pattern Maker click here
Brief Job Description:-The advance pattern maker uses the CAD system to recreate the pattern design techniques by transferring ideas to the computer, digitizing and modifying patterns and also the use of CAM to get the patterns and lays cut out in the actual sizes
PersonalAttributes:-Needs to have the knowledge to interpret instructions, specs or sample clothing designs and working of the particular software/system to produce a pattern. He/she should also have basic mathematical skills, particularly making calculations and measuring. Good written and oral communication skills Advance Pattern Maker Course.
Prepare the prerequisites for CAD/CAM operation Advance Pattern Maker Course:-
To be competent, you must be able to:
PC1. Downloading and organizing information obtained by designer/buyer
PC2. Analyzing specific information and translating according to company procedure Advance Pattern Maker Course.
PC3. Coordinate with merchandiser to ensure clarity of information and resolve any possible misinterpretations
Operate the CAD/CAM Advance Pattern Maker Course:- PC4. Draft the pattern on the CAD software as per specification given
PC5. Digitize the manual pattern on the CAD software, if applicable, as per specification given
PC6. Adjust the pattern specifications as per the standard and allowances required
PC7. Perform size wise grading of patterns as provided in the BOM(Bill of Material)
PC8. Incorporate shrinkage in pattern grading Advance Pattern Maker Course.
PC9. Determine the cut ratio plan
PC10. Perform the most efficient marker( lay planning) according to the configuration intended
PC11. Set Parameters on CAM as per required output
PC12. Ensure the design output is cut and hand over to the next department Advance Pattern Maker Course.
PC13. Ensure the work is saved as a back-up before shutting down the CAD machine
PC14. Take printout of mini marker to be handed over to the merchandiser, for reference
PC15. Shut down, after use, the CAD/CAM system carefully and in accordance with company instructions.
Comply with health, safety and security requirements at work Advance Pattern Maker Course:-
To be competent, the user/individual on the job must be able to:
PC1. Comply with health and safety related instructions applicable to the workplace
PC2. Use and maintain personal protective equipment as per protocol
PC3. Carry out own activities in line with approved guidelines and procedures
PC4. Maintain a healthy lifestyle and guard against dependency on intoxicants
PC5. Follow environment management system related procedures Advance Pattern Maker Course.
PC6. Identify and correct (if possible) malfunctions in machinery and equipment
PC7. Report any service malfunctions that cannot be rectified
PC8. Store materials and equipment in line with manufacturer’s and organizational requirements
PC9. Safely handle and move waste and debris Advance Pattern Maker Course.
PC10. Minimize health and safety risks to self and others due to own actions
PC11. Seek clarifications, from supervisors or other authorized personnel in case of perceived risks PC12. Monitor the workplace and work processes for potential risks and threats
PC13. Carry out periodic walk-through to keep work area free from hazards and obstructions, if assigned PC14. Report hazards and potential risks/ threats to supervisors or other authorized personnel
PC15. Participate in mock drills/ evacuation procedures organized at the workplace
PC16. Undertake first aid, fire-fighting and emergency response training, if asked to do so
PC17. Take action based on instructions in the event of fire, emergencies or accidents Advance Pattern Maker Course.
PC18. Follow organisation procedures for shutdown and evacuation when required
Guidelines for Assessment Advance Pattern Maker Course:-
- Criteria for assessment for each Qualification Pack will be created by the Sector Skill Council. Each Performance Criteria (PC) will be assigned marks proportional to its importance in NOS. SSC will also lay down proportion of marks for Theory and Skills Practical for each
PC 2. The assessment for the theory part will be based on knowledge bank of questions created by the
SSC 3. Individual assessment agencies will create unique question papers for theory part for each candidate at each examination/training center (as per assessment criteria below)
4. Individual assessment agencies will create unique evaluations for skill practical for every student at each examination/training center based on this criteria Advance Pattern Maker Course.
5. To pass the Qualification Pack, every trainee should score a minimum of 70% in every NOS
6. In case of successfully passing only certain number of NOS’s, the trainee is eligible to take subsequent assessment on the balance NOS’s to pass the Qualification Pack
( Pattern development through CAD/CAM ) Advance Pattern Maker Course:-
PC1 .Downloading and organizing information obtained by designer/buyer
PC2 Analysing specific information and translating according to company procedure
PC3. Coordinate with merchandiser to ensure clarity of information and resolve any possible misinterpretations
PC4. Draft the pattern on the CAD software as per specification given Advance Pattern Maker Course.
PC5. Digitize the manual pattern on the CAD software, if applicable, as per specification given
PC6. Adjust the pattern specifications as per the standard and allowances required
PC7. Perform size wise grading of patterns as provided in the BOM(Bill of Material)
PC8. Incorporate shrinkage in pattern grading
PC9. Determine the cut ratio plan
PC10. Perform the most efficient marker( lay planning) according to the configuration intended
PC11. Set Parameters on CAM as per required output
PC12. Ensure the design output is cut and hand over to the next department Advance Pattern Maker Course.
PC13. Ensure the work is saved as a back-up before shutting down the CAD machine
PC14. Take printout of mini marker to be handed over to the merchandiser, for reference
PC15. Shut down, after use, the CAD/CAM system carefully and in accordance with company instructions
(Maintenance of work area, machinery tools and equipments):-
PC1.Prepare and organize work
PC2. Use correct handling procedures.
PC3. Work in comfortable position with correct posture
PC5. Maintain tools and equipment
PC6. Carry out running maintenance within agreed schedules
PC7. Carry out maintenance and/or cleaning within one’s responsibility
PC8. Report unsafe equipment and other dangerous occurrences
PC9. Use cleaning equipment and methods appropriate for the work to be carried out
PC10. Carry out cleaning according to schedules and limits of responsibility
PC11. Request for upgrading of system or softwares when required for effective working
PC12. Always a backup file to be maintained when working on various design softwares
PC13. All soft copies of design work to be maintained in files as well for future reference
(Maintain health, safety and security at workplace):-
PC1. Comply with health and safety related instructions applicable to the workplace
PC2. Use and maintain personal protective equipment as per protocol
PC3. Carry out own activities in line with approved guidelines and procedures
PC4. Maintain a healthy lifestyle and guard against dependency on intoxicants
PC5. Follow environment management system related procedures
PC6. Identify and correct (if possible) malfunctions in machinery and equipment
PC7. Report any service malfunctions that cannot be rectified
PC8. Store materials and equipment in line with manufacturer’s and organizational requirements
PC9. Safely handle and move waste and debris
PC10. Minimize health and safety risks to self and others due to own actions
PC11. Seek clarifications, from supervisors or other authorized personnel in case of perceived risks
PC12. Monitor the workplace and work processes for potential risks and threats
PC13. Carry out periodic walk-through to keep work area free from hazards and obstructions, if assigned
PC14. Report hazards and potential risks/ threats to supervisors or other authorized personnel
PC15. Participate in mock drills/ evacuation procedures organized at the workplace
PC16. Undertake first aid, fire-fighting and emergency response training, if asked to do so
PC17. Take action based on instructions in the event of fire, emergencies or accidents
PC18. Follow organisation procedures for shutdown and evacuation when required
Organizational Context:-
KA1. Health and safety related practices applicable at the workplace
KA2. Potential hazards, risks and threats based on nature of operations
KA3. Organizational procedures for safe handling of equipment and machine operations
KA4. Potential risks due to own actions and methods to minimize these
KA5. Environmental management system related procedures at the workplace
KA6. Layout of the plant and details of emergency exits, escape routes, emergency equipment and assembly points
KA7. Potential accidents and emergencies and response to these scenarios
KA8. Reporting protocol and documentation required
KA9. Details of personnel trained in first aid, fire-fighting and emergency response
KA10. Actions to take in the event of a mock drills/ evacuation procedures or actual accident, emergency or fire
Technical Knowledge:-
The user/individual on the job needs to know and understand:
KB1. Occupational health and safety risks and methods
KB2. Personal protective equipment and method of use
KB3. Identification, handling and storage of hazardous substances
KB4. Proper disposal system for waste and by-products
KB5. Signage related to health and safety and their meaning
KB6. Importance of sound health, hygiene and good habits
KB7. Ill-effects of alcohol, tobacco and drugs
.
