Online Skill Training app
Change Language
Advance Pattern Maker Course

Free Advance Pattern Maker Course(1year Diploma)

Advance Pattern Maker click here

Brief Job Description:-The advance pattern maker uses the CAD system to recreate the pattern design techniques by transferring ideas to the computer, digitizing and modifying patterns and also the use of CAM to get the patterns and lays cut out in the actual sizes

PersonalAttributes:-Needs to have the knowledge to interpret instructions, specs or sample clothing designs and working of the particular software/system to produce a pattern. He/she should also have basic mathematical skills, particularly making calculations and measuring. Good written and oral communication skills Advance Pattern Maker Course.

Prepare the prerequisites for CAD/CAM operation Advance Pattern Maker Course:-

To be competent, you must be able to:

 PC1. Downloading and organizing information obtained by designer/buyer

PC2. Analyzing specific information and translating according to company procedure Advance Pattern Maker Course.

PC3. Coordinate with merchandiser to ensure clarity of information and resolve any possible misinterpretations

Operate the CAD/CAM Advance Pattern Maker Course:- PC4. Draft the pattern on the CAD software as per specification given

Advance Pattern Maker Course

PC5. Digitize the manual pattern on the CAD software, if applicable, as per specification given

 PC6. Adjust the pattern specifications as per the standard and allowances required

 PC7. Perform size wise grading of patterns as provided in the BOM(Bill of Material)

PC8. Incorporate shrinkage in pattern grading Advance Pattern Maker Course.

 PC9. Determine the cut ratio plan

PC10. Perform the most efficient marker( lay planning) according to the configuration intended

PC11. Set Parameters on CAM as per required output

PC12. Ensure the design output is cut and hand over to the next department Advance Pattern Maker Course.

PC13. Ensure the work is saved as a back-up before shutting down the CAD machine

 PC14. Take printout of mini marker to be handed over to the merchandiser, for reference

PC15. Shut down, after use, the CAD/CAM system carefully and in accordance with company instructions.

Pattern Making And Stitching Course - Advance Pattern Making And Stitching  Course Service Provider from Hyderabad

Comply with health, safety and security requirements at work Advance Pattern Maker Course:-

To be competent, the user/individual on the job must be able to:

PC1. Comply with health and safety related instructions applicable to the workplace

 PC2. Use and maintain personal protective equipment as per protocol

PC3. Carry out own activities in line with approved guidelines and procedures

PC4. Maintain a healthy lifestyle and guard against dependency on intoxicants

PC5. Follow environment management system related procedures Advance Pattern Maker Course.

 PC6. Identify and correct (if possible) malfunctions in machinery and equipment

 PC7. Report any service malfunctions that cannot be rectified

 PC8. Store materials and equipment in line with manufacturer’s and organizational requirements

PC9. Safely handle and move waste and debris Advance Pattern Maker Course.

 PC10. Minimize health and safety risks to self and others due to own actions

 PC11. Seek clarifications, from supervisors or other authorized personnel in case of perceived risks PC12. Monitor the workplace and work processes for potential risks and threats

PC13. Carry out periodic walk-through to keep work area free from hazards and obstructions, if assigned PC14. Report hazards and potential risks/ threats to supervisors or other authorized personnel

PC15. Participate in mock drills/ evacuation procedures organized at the workplace

 PC16. Undertake first aid, fire-fighting and emergency response training, if asked to do so

 PC17. Take action based on instructions in the event of fire, emergencies or accidents Advance Pattern Maker Course.

PC18. Follow organisation procedures for shutdown and evacuation when required

Guidelines for Assessment Advance Pattern Maker Course:-

  1. Criteria for assessment for each Qualification Pack will be created by the Sector Skill Council. Each Performance Criteria (PC) will be assigned marks proportional to its importance in NOS. SSC will also lay down proportion of marks for Theory and Skills Practical for each

PC 2. The assessment for the theory part will be based on knowledge bank of questions created by the

 SSC 3. Individual assessment agencies will create unique question papers for theory part for each candidate at each examination/training center (as per assessment criteria below)

4. Individual assessment agencies will create unique evaluations for skill practical for every student at each examination/training center based on this criteria Advance Pattern Maker Course.

5. To pass the Qualification Pack, every trainee should score a minimum of 70% in every NOS

 6. In case of successfully passing only certain number of NOS’s, the trainee is eligible to take subsequent assessment on the balance NOS’s to pass the Qualification Pack

( Pattern development through CAD/CAM ) Advance Pattern Maker Course:-

PC1 .Downloading and organizing information obtained by designer/buyer

PC2 Analysing specific information and translating according to company procedure

PC3. Coordinate with merchandiser to ensure clarity of information and resolve any possible misinterpretations

PC4. Draft the pattern on the CAD software as per specification given Advance Pattern Maker Course.

PC5. Digitize the manual pattern on the CAD software, if applicable, as per specification given

PC6. Adjust the pattern specifications as per the standard and allowances required

PC7. Perform size wise grading of patterns as provided in the BOM(Bill of Material)

PC8. Incorporate shrinkage in pattern grading

PC9. Determine the cut ratio plan

PC10. Perform the most efficient marker( lay planning) according to the configuration intended

PC11. Set Parameters on CAM as per required output

PC12. Ensure the design output is cut and hand over to the next department Advance Pattern Maker Course.

PC13. Ensure the work is saved as a back-up before shutting down the CAD machine

PC14. Take printout of mini marker to be handed over to the merchandiser, for reference

PC15. Shut down, after use, the CAD/CAM system carefully and in accordance with company instructions

(Maintenance of work area, machinery tools and equipments):-

PC1.Prepare and organize work

PC2. Use correct handling procedures.

PC3. Work in comfortable position with correct posture

PC5. Maintain tools and equipment

PC6. Carry out running maintenance within agreed schedules

PC7. Carry out maintenance and/or cleaning within one’s responsibility

PC8. Report unsafe equipment and other dangerous occurrences

PC9. Use cleaning equipment and methods appropriate for the work to be carried out

PC10. Carry out cleaning according to schedules and limits of responsibility

PC11. Request for upgrading of system or softwares when required for effective working

PC12. Always a backup file to be maintained when working on various design softwares

PC13. All soft copies of design work to be maintained in files as well for future reference

(Maintain health, safety and security at workplace):-

PC1. Comply with health and safety related instructions applicable to the workplace

PC2. Use and maintain personal protective equipment as per protocol

PC3. Carry out own activities in line with approved guidelines and procedures

PC4. Maintain a healthy lifestyle and guard against dependency on intoxicants

PC5. Follow environment management system related procedures

PC6. Identify and correct (if possible) malfunctions in machinery and equipment

PC7. Report any service malfunctions that cannot be rectified

PC8. Store materials and equipment in line with manufacturer’s and organizational requirements

PC9. Safely handle and move waste and debris

PC10. Minimize health and safety risks to self and others due to own actions

PC11. Seek clarifications, from supervisors or other authorized personnel in case of perceived risks

PC12. Monitor the workplace and work processes for potential risks and threats

PC13. Carry out periodic walk-through to keep work area free from hazards and obstructions, if assigned

PC14. Report hazards and potential risks/ threats to supervisors or other authorized personnel

PC15. Participate in mock drills/ evacuation procedures organized at the workplace

PC16. Undertake first aid, fire-fighting and emergency response training, if asked to do so

PC17. Take action based on instructions in the event of fire, emergencies or accidents

PC18. Follow organisation procedures for shutdown and evacuation when required

Organizational Context:-

KA1. Health and safety related practices applicable at the workplace

 KA2. Potential hazards, risks and threats based on nature of operations

KA3. Organizational procedures for safe handling of equipment and machine operations

KA4. Potential risks due to own actions and methods to minimize these

KA5. Environmental management system related procedures at the workplace

 KA6. Layout of the plant and details of emergency exits, escape routes, emergency equipment and assembly points

 KA7. Potential accidents and emergencies and response to these scenarios

KA8. Reporting protocol and documentation required

 KA9. Details of personnel trained in first aid, fire-fighting and emergency response

 KA10. Actions to take in the event of a mock drills/ evacuation procedures or actual accident, emergency or fire

Technical Knowledge:-

The user/individual on the job needs to know and understand:

KB1. Occupational health and safety risks and methods

KB2. Personal protective equipment and method of use

KB3. Identification, handling and storage of hazardous substances

KB4. Proper disposal system for waste and by-products

 KB5. Signage related to health and safety and their meaning

KB6. Importance of sound health, hygiene and good habits

KB7. Ill-effects of alcohol, tobacco and drugs

.